GE IC697CPM925 Single slot CPU Module
GE IC697CPM925 Single slot CPU Module

GE IC697CPM925 Single slot CPU Module

1.Warranty time: 1 year

2.Delivery time: 3-5 days

3.Product quality: new or discontinued second-hand

1. We are a global trading company, we have a large stock of spare parts, we also produce energy storage batteries

2. Our main sales products are industrial automation control equipment accessories, such as: controller board, processor module, communication module, input and output module, power module (various circuit boards and cards), touch screen, servo driver, servo motor, sensor, cable......

3. We can not only provide new products, but also supply cold and discontinued spare parts, all the discontinued parts will go through strict testing to ensure the reliability of product performance, so that customers can buy and use at ease

4. For more information, please contact us: Contact: Amy | Email: saul01@qq.com | Tel(WhatsApp/Wechat): +86-15359298283


GE IC697CPM925 Single slot CPU Module

GE IC697CPM925 Single slot CPU Module(图1)

GE IC697CPM925 Single slot CPU Module PLC CPUs 64 MHz, 32-Bit Floating Point Central Processing Unit,1 Mbyte Memory The CPM 925 is a single slot programmable controller CPU which allows floating point calculations. The CPM 925 CPU is programmed and configured by MS-DOS or Windows based programming software to perform real time control of machines, processes and material handling systems. It communicates with I/O and smart option modules over the rack mounted backplane (IC697CHS750, 782, 783, 790, 791) by way of the VME C.1 Standard format. Supported option modules include all IC697 LAN interface modules, several Coprocessor modules, Bus Controller for IC660/IC661 I/O, Communications modules, and all of the IC697 family of discrete and analog I/O modules.

GE IC697CPM925 Single slot CPU Module(图2)

Features 


 Single slot CPU 


 Provides 1 Mbyte of battery-backed memory in the same slot 


 Supports floating point calculations 


 12K inputs and outputs (any mix) 


 Up to 8K analog I/O 


 0.4 microseconds per boolean function 


 64 MHz, 80486DX2 microprocessor 


 Supports IC660/IC661 and IC697 I/O 


 Programmed by MS-DOS or Windows software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port 


 Configurable data and program memory 


 Battery-backed calendar clock 


 Three position operation mode switch 


 Password controlled access 


 Remote programmer keyswitch memory protection 


 Four status LEDs 


 Software configuration (No DIP switches or jumpers) 


 Reference information inside front door 


 In-system upgradable firmware






Connecting your programmer via an Ethernet TCP/IP network requires installation of an Ethernet Interface module in the PLC. This can be either the Ethernet Controller, IC697CMM741, or Ethernet Interface (Type 2), IC697CMM742. Before connecting your programmer and PLC to the Ethernet TCP/IP network you must set the IP address in the Ethernet Interface. After setting the IP address, connect the PLC and the programmer running Windows software to the Ethernet Interface. For more detailed information on Ethernet TCP/IP, refer to the TCP/IP Ethernet Communications (Type 2) User’s Manual, and the Windows programming manual, GFK-1295

GE IC697CPM925 Single slot CPU Module



Copyright Beixun Automation All Rights Reserved Sitemap

Follow Us
Disclaimers: All trademarks on the website are not owned by us. If there is any infrigement, wecan replace them at any time.