1.Warranty time: 1 year
2.Delivery time: 3-5 days
3.Product quality: new or discontinued second-hand
1. We are a global trading company, we have a large stock of spare parts, we also produce energy storage batteries
2. Our main sales products are industrial automation control equipment accessories, such as: controller board, processor module, communication module, input and output module, power module (various circuit boards and cards), touch screen, servo driver, servo motor, sensor, cable......
3. We can not only provide new products, but also supply cold and discontinued spare parts, all the discontinued parts will go through strict testing to ensure the reliability of product performance, so that customers can buy and use at ease
4. For more information, please contact us: Contact: Amy | Email: saul01@qq.com | Tel(WhatsApp/Wechat): +86-15359298283
ABB 70PR05B-ES HESG332204R0001 Servo controller
ABB 70PR05B-ES HESG332204R0001 Servo controller
70PR05B-ES HESG332204R0001 Specifies that the number of words in each block is transferred between the module and the processor. Specifies whether ports and commands are: activated when the module starts. Type Master, Slave, or Slave with Passthrough This parameter specifies the device type imitation of the port. For more information, see Slave Mode (page 72) Slave Through options.
Enron Daniels Yes or No to use floating-point data offsets. Protocol RTU or ASCII Modbus protocol for the specified port. Baud Rate Multiple options specify the baud rate of the port. Parity None, odd, even if the type of parity error check is specified. All devices must use the same parity setting to open this port. Data bits 7 or 8 Set that all devices communicating through this port by protocol must use the same number of data bits. Stop bit 1 or 2 Sets the number of stop bits that represent the end of the character in the data stream. For most applications, use a stop bit. For slower devices that require more time: To resynchronize, use two stop bits. All devices communicating through this port must use the same number of stop bits. The number of milliseconds of delay after RTS Settings are ready to send (RTS) is asserted before data transmission. RTS Off 0 to 65535 ms Sets the number of milliseconds after the last delay before setting the RTS modem signal to send data bytes low
ABB 70PR05B-ES HESG332204R0001 Servo controller
