1. We are a global trading company, we have a large stock of spare parts, we also produce energy storage batteries

2. Our main sales products are industrial automation control equipment accessories, such as: controller board, processor module, communication module, input and output module, power module (various circuit boards and cards), touch screen, servo driver, servo motor, sensor, cable......

3. We can not only provide new products, but also supply cold and discontinued spare parts, all the discontinued parts will go through strict testing to ensure the reliability of product performance, so that customers can buy and use at ease

4. For more information, please contact us: Contact: Amy | Email: saul01@qq.com | Tel(WhatsApp/Wechat): +86-15359298283

216EA62 1MRB150083R1F 1MRB178066R1F Control module DCS system

216EA62 1MRB150083R1F 1MRB178066R1F Control module DCS system

216EA62 1MRB150083R1F 1MRB178066R1F Control module DCS system

216Between the EA62 and the IP dual P/T module. Under these conditions, the temperature between the inlet and outlet air was observed to rise by 10 ° C. The 70°C outlet air temperature (60°C intake), the device's connection temperature is calculated MVME162 (based on the measured case temperature) and is verified not to exceed 100°C. Note: For high-temperature operations, the user must perform similar measurements and calculations to determine the presence in a particular environment.

Here are some steps the user can take to help achieve the heating operation: 1. Place the MVME162 board in the case to obtain the component side of the board with maximum airflow on the case. Only low-power IP modules are used. The preferred positions for IP modules are positions a (J2 and J3) and d (J18 and J19). The Communications Commission Regulation MVME162 was tested without industrial packaging and meets the requirements for Class A equipment. FCC compliance is achieved under the following conditions: Shielded cables on all external input/output ports. Cable shields connected to the ground through metal housing connectors connect to the conductive module front panel. Conductive chassis guide is grounded. This provides a path to connect the shield to the ground. Screws on the front panel are properly tightened. For minimum RF emission, the above conditions must be fulfilled. Failure to do so may affect the FCC's overview of devices that include modules The MVME162 is either a dual-height VMEmodule equipped with the MC68LC040 or an optional MC68040 microprocessor. (The MC68040 microprocessor has a floating-point coprocessor; MC68LC040 No.) The MVME162 has 1MB, 4MB or 8MB parity-protected DRAM; 512KBSRAM with spare battery; TOD clock (with spare battery); Optional LAN Ethernet transceiver interface with DMA, two serial ports (EIA-232-D and EIA-232-D/EIA-530); Six tick timers with watchdog timers; Optional SCSI bus and DMA interface; VMEbus interface (local bus to VMEbus/VMEbus to local bus, with A16/A24/A32, D8/D16/D32 bus width and VMEbus system controller).

216EA62 1MRB150083R1F 1MRB178066R1F Control module DCS system