1.Warranty time: 1 year
2.Delivery time: 3-5 days
3.Product quality: new or discontinued second-hand
1. We are a global trading company, we have a large stock of spare parts, we also produce energy storage batteries
2. Our main sales products are industrial automation control equipment accessories, such as: controller board, processor module, communication module, input and output module, power module (various circuit boards and cards), touch screen, servo driver, servo motor, sensor, cable......
3. We can not only provide new products, but also supply cold and discontinued spare parts, all the discontinued parts will go through strict testing to ensure the reliability of product performance, so that customers can buy and use at ease
4. For more information, please contact us: Contact: Amy | Email: saul01@qq.com | Tel(WhatsApp/Wechat): +86-15359298283
DEIF DELOMATIC SCM-1 POS 1044220100F Synchronizing Module
DEIF DELOMATIC SCM-1 POS 1044220100F Synchronizing Module The SCM-1 module consists of three boards connected by an eight wired bus on the front side (not the backplane bus). The boards for SCM-1 are named SCM-A, SCM-B and SCM-C and these names can be found on the boards.
SCM-A board:
Two relay-boards OPR-1 can be mounted.
One for output for a mechanical speed governor (instead of electronic speed governor), and one
for outputs for mechanical voltage regulation (instead of electronic voltage regulation).For replacement of OPR-1 the screw for holding SCM-A must be removed, replace the OPR-1
modules, mount SCM-A ag
SCM-B board:
DIP switches:
The I/O address for the backplane bus of the rack is to be set. Notices that all SCM-1, SCM-2 and
PRM-1 modules must have different I/O addresses starting with number zero (null) and up to two.
The number sequence can be interrupted. The I/O address is set by the S2 switch.
SCM-C board:
DIP switches:
The voltage measuring range is selected by jumpers on this board.
For generator voltage the measuring range is selected by jumpers X5, X6, X7 and X8 and for the
busbar voltage the measuring range is selected by jumpers X10, X11, X12 and X13 (one jumper
for each phase and the 0-conductor.
Replacement instruction ñ SYNCHRONIZING/MEASURING MODULE SCM-1 Placement of I/O addr./ jumpers SCM-B DELOMATIC Placement of I/O addr./ jumpers SCM-C DELOMATIC Replacement of OPR-1 modules
PCM4-1
PCM42
PCM43
PCM44
PCM5-1
PPU2
RMC-111D
RMC-131D
RMC-131D/2
RMF-112D
RMV-112D
SCM-1
SCM41
SCM4-1
SCM42
SCM4-2
SMC-C
TAC-311DG
TAP-210DG/3
TAS-331DG
DEIF DELOMATIC SCM-1 POS 1044220100F Synchronizing Module
DEIF DELOMATIC SCM-1 POS 1044220100F Synchronizing Module
